Anti Whip Hose 0.6m of 7mm i/d Hose, Standard Adaptor One End & Male Thread 1/4 NPT Other End

SKU:

HA2124N

Air Tool Whip Hose

Health and Safety recommend that an Air Tool Whip Hose is used to distance an air tool from its air supply to prevent vibration.

The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations.

See ISO 4414:1998 and EN 983:1996 for safety requirements covering the installation and use of pneumatic equipment.

A Health and Safety Guide has been produced which covers the use of pneumatic equipment.

The Health & Safety Executive Guide HS(G) 39 states "requirements for quick acting couplings apply to most percussive and vibrating air tools, which may be fixed or handheld. If a quick acting coupling socket is fitted at the hose end adjacent to the tool, the plug should not be screwed directly into the inlet port but should be fitted onto a short isolation hose (0.5m to 1m long), thus isolating the plug and socket from the tool vibration."

The International Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and a quick acting coupling.

Specification
Hose Inside Diameter: 7 mm / 1/4 in
Hose Outside Diameter: 14 mm
Hose Length: 0.6 m / 2ft

More Information
Weight (kg) 0.7900
UOM Ea
ean 5014875860572
Brand PCL
Condition New
Write Your Own Review
You're reviewing:Anti Whip Hose 0.6m of 7mm i/d Hose, Standard Adaptor One End & Male Thread 1/4 NPT Other End
Your Rating
Coronavirus update: We are open for business. Despite our best efforts, some lead times may be impacted.
For more information click here
Copyright © 2020 Pneumatic Components Ltd. All rights reserved.